Mining equipment Archive Search Results
Showing
1 - 20
of 33
, query time: 0.01s
1. Belden
Format:
Image
A close-up of facilities at Belden, some abandoned. Across the Eagle River, the power plant is visible at left.
Format:
Image
Using a level to make sure the mine tailings flume is canted to the right angle. Tailings were piped from Gilman as a slurry and, as the slurry dried, it became the same consistency as a fine sand.
Format:
Image
Wood framing used to support walls and overhead in the mine at Gilman, known as ”Mitchell Sets."
4. Repair area
Format:
Image
From far left: Chuck Colby, Berniece Chadwick and Davy Burnett. Jean Flaherty is at far right.
5. Belden
Format:
Image
Facilities at Belden, some abandoned. Mine buildings are at right, midfield. The Eagle River is at the right and railroad tracks are at the bottom
Format:
Image
Dick Sayers (left) and John Skinner, examining ore in the ore cars. Both men are wearing headlamps.
Format:
Image
Using a lift to move drums of chemicals in the Gilman mine.
8. Machinery
Format:
Image
Machinery seen through railings.
Format:
Image
Air operated mucking machine. The scoop goes over the mucking machine and empties the ore into the car behind. Miners also used these cars to move mining timbers throughout the mine. The machines and cars ran on rail tracks.
10. Adjusting valves
Format:
Image
Dick Sayers (left) and John Skinner discussing the adjustments to equipment. A good view of the headlamp attachment to the battery pack carried on one's belt.
11. Rail ore cars
Format:
Image
Ore cars full of ore lined up on the rails, waiting to go to the crushers.
Format:
Image
Looking across the railroad tracks at Belden, the tram house is white, midground; the surface tram cable is running up the cliff on the right. Cribbing visible at center.
13. Belden
Format:
Image
Facilities at Belden, some abandoned. Gilman is visible at the top of the cliff. Mine buildings are at right, midfield.
14. Adjusting valves
Format:
Image
Dick Sayers (left) and John Skinner adjusting the valves on equipment.
15. New dryer
Format:
Image
The new dryer in place for the Gilman mine.
Format:
Image
Verso: "Don headed for Evening Star Mine at Gilman"
Behind Don [wearing his head lamp] is a stack of mining timbers.
Format:
Image
Using a lift to move mine timbers at the Gilman mine. They are in bundles of 9 timbers which fit vertically in the main shaft cage for transport to lower levels. The Minturn bus is in the background.
Format:
Image
Supply warehouse at Belden. Supplies came by rail through the Eagle River canyon and went into this warehouse. Robert E. Riggle worked here.
19. Adjusting valves
Format:
Image
Dick Sayers (left) and John Skinner adjusting the valves on equipment.
20. Belden
Format:
Image
A close-up of facilities at Belden, some abandoned.