Belden, Colorado Archive Search Results
Showing
61 - 80
of 86
, query time: 0.01s
Format:
Image
A ground squirrel takes a lunch break on a wall near the compressor house in Belden. It seems that everyone had to work no matter what they were.
Format:
Image
Eagle Mine (New Jersey Zinc Co.) showing the rail access at Belden, looking down. Depot structures and mine buildings visible at the bottom of the canyon. The town of Gilman would be at the top of the escarpment.
Format:
Image
Bill May adjusting the controls on the compressor at Belden; Harold Steinmeyer supervising.
64. Derailment
Format:
Image
Walkway to the compressor building from the dryer building. In the background are wrecked
railroad cars. The Eagle River runs beneath the bridge, although hidden by ice and snow.
65. Derailment
Format:
Image
Railroad engine of the Rio Grande Railroad at Belden in the winter. Wrecked railcars can be seen in the snow to the right.
Format:
Image
Ramond M. "Hap" Fletcher plowing snow after a slide at Belden in the winter. Fletcher was a heavy equipment operator for the New Jersey Zinc Co. The vehicle was tracked for better performance in the heavy snow in the Eagle Canyon near Belden.
Format:
Image
Hap Fletcher pushing snow with a dozer after a snow slide near Belden.
68. New zinc dryer
Format:
Image
Quinton Sagrillo performing maintenance on the new zinc dryer. Sagrillo was a dryer operator for New Jersey Zinc.
Sagrillo served in World War I and then lived in Telluride and Denver. He and his wife Rose then managed the State Agricultural Farm Experiment Station at Avon for four years. He accepted employment with New Jersey Zinc, working there for 20 years before retiring in 1959.
Format:
Image
Quinton Sagrillo or Frank Jones or Mike Chockie lubricating part of the zinc dryer at Belden.
Format:
Image
Entrance point of the zinc concentrate into the dryer.
Format:
Image
Looking down at the Eagle River in Eagle Canyon, at a portion of the railroad tracks at Belden.
Format:
Image
Belden as seen from Gilman. On the left are the loading tippel, steam room and dryer. Loading tippel is extended over the railroad cars to be filled with ore. A surface tram carrying ore ready for loading is visible behind the loading tippel.
73. Belden
Format:
Image
The Belden processing and shipping area for the ore that was mined at Gilman Mine. The loading tippel is the first building on the left (white); next is the steam room and then the dryer.
Box cars are lined up on the tracks by the loading tippel. The box cars at the center of the photo are underneath the Ben Butler Mine.
Format:
Image
Harold Steinmeyer and Bill May in the compressor room at Belden. Compressor equipment in the background is Ingersoll-Rand. During the spring and summer months, power for the compressors was provided by using Pelton Wheels (turbines) situated in nearby Fall Creek to generate electricity.
Format:
Image
New dryer being put in place at Belden. Drying fins are seen in the inside of the dryer.
Format:
Image
Moving the zinc dryer from a railroad car into the dryer building at Belden. A wall section approximately 60 feet long has been removed in the dryer building to move this equipment
into the facility.
Format:
Image
Moving a dryer section into place by blocking and chaining. Small sections pf pipe were also used to move the dryer.
Format:
Image
Section of the zinc dryer being fitted into place at Belden. Chains and blocks are used to move the equipment into the building.
79. Transportation
Format:
Image
A sideview of the mantrip. Barry and Shirley Evans are at the back, Lucille Riggle in blue is facing the camera in front of them. Pete and Ella Burnett and Terry Pierson are in front.
80. Cap lamp room
Format:
Image
Berniece Chadwick, Alberta Limatta, and Ella Burnett with Hawkeye and Jean Flaherty behind them in the cap lamp room. The belts visible on Berniece and Ella hold a battery pack on the back with a power cord attaching to the lamp. Each lamp had 2 filaments so that if one burned out, the power could be switched to the second.